GENERAL FINISHES ENDURO WATER BASED EXTENDER

$15.99

ENDURO WATER BASED EXTENDER

Extender is a wetting additive used to improve flow and leveling and slow the drying time of any water-based stain, topcoat or glaze, which is helpful in hot, dry conditions.  

How To Use General Finishes Extender

General Finishes Extender is a water-based wetting additive that can be used to extend the drying time of all General Finishes water based topcoats, stains, primers, glazes and paints. Do not use with oil-based products. 

Extender Application Steps

Watch Extender Product Overview Video Here

  1. Work in a well-ventilated area. 
  2. Slowly add 10-15% by volume if allowed by local regulations to lengthen the drying time of GF water-based products. California Residents: Adding more than 2% of GF Extender will make the products non-compliant per SCAQMD Rules & Regulations. GF assumes no liability for the improper use of these products.
  3. Stir thoroughly to incorporate GF Extender into coating. 
  4. Test product. 

All mixes of General Finishes water-based products containing up to 15% General Finishes Extender or General Finishes Accelerator can be stored.

Cleanup of Water Based Products

Application tools and materials containing water-based products can be cleaned with soap and water or General Finishes Brush & Gun Cleaner immediately after use.

Product Spills
Spills may be able to be removed from fabric and carpet if cleaned immediately with soap and water.

Disposal

Discard unused product and waste in an environmentally safe manner; check with local fire and health regulation. 

You may also like